Modified Nylon Milling Jar
A one-piece moulded modified-nylon jar for compatible planetary milling and mixing.
Overview
A one-piece moulded modified-nylon jar for compatible planetary milling and mixing. Specify the material formulation and complete jar geometry for the selected process.
How it works
The jar working surface forms part of the contact system between sample, media and mill. Material selection should balance the required mechanical action with chemical compatibility and the acceptable contribution from wear.
Confirm the specific modification, polymer grade, solvent compatibility and permitted temperature. It should not be assumed to share the properties of every nylon jar.
Key features
- A moulded one-piece structure.
- The dimension table covers nominal volumes from 250 mL to 10 L.
- Select the polymer formulation around the sample, liquid and operating temperature.
Specifications
Published catalog references are reproduced below. Nominal volume is not a sample-mass rating. Confirm the selected model, material grade, electrical supply and complete supplied configuration in the quotation.
| Model / nominal volume | External diameter (mm) | Internal diameter (mm) | Height (mm) |
|---|---|---|---|
| 250mL | 98 | 73 | 90 |
| 500mL | 109 | 84 | 120 |
| 1000mL | 133 | 108 | 140 |
| 2000mL | 159 | 145 | 175 |
| 3000mL | 178 | 154 | 198 |
| 5000mL | 219 | 188 | 218 |
| 10L | 248 | 216 | 300 |
Applications
Compatible polymer-contact mixing and laboratory powder-processing studies.
Suitability depends on the actual sample, process and analytical requirements; a listed application is not a guaranteed final-particle-size result.
Accessories and options
Specify the material formulation, jar envelope, lid and machine holder. Ask for the supplied grade if a comparison with standard nylon is important.
State the required grade, quantities, drawings and destination when requesting a quotation. Confirm what is included, the document requirements, packing and commercial terms; no generic delivery time or universal custom capability is assumed.
Compare milling jars · Compare grinding media · Air-cooled systems · Ultrasonic-assisted systems
Selection guidance
Match modified nylon to the sample chemistry and the elements or residues that matter to the analysis. Then confirm the dimensions, complete loaded mass and operating arrangement against the selected mill.
Work through the selection guide · Request a configuration quotation
Trials and comparisons
No identifiable trial of this exact product/configuration was found in the available planetary-milling test summaries. A result from a different mill, jar grade or assistance system is not attributed to this product.
A comparison to request
For a modified nylon comparison, use matched sample portions and the same measurement/dispersion method. State the jar, media, mass/volume loading basis, processing schedule and contamination measurements. A change in material grade alone is not established as the cause of a result.
Discuss a sample evaluationProduct FAQs
Does modified nylon identify one specific reinforced grade?
No. Modification can refer to different formulations. Request the supplied grade and its compatibility information, especially when solvents, temperature or polymer wear matter to the analysis.
Which modified nylon jar size will fit my mill?
Listed nominal volumes: 250mL, 500mL, 1000mL, 2000mL, 3000mL, 5000mL, 10L. Check external diameter, complete lid-inclusive height, holder/clamp geometry and loaded mass. Specify the material formulation, jar envelope, lid and machine holder. Ask for the supplied grade if a comparison with standard nylon is important.
Can this jar be filled to its nominal volume with sample?
No. Allow space for media and material movement, and check the permitted loaded mass. Confirm the specific modification, polymer grade, solvent compatibility and permitted temperature. It should not be assumed to share the properties of every nylon jar. Agree the charge for the actual modified nylon jar and process.
How should I choose the matching grinding media?
Consider the sample chemistry, the jar working material, contamination limits and the required result. Confirm the specific modification, polymer grade, solvent compatibility and permitted temperature. It should not be assumed to share the properties of every nylon jar. Confirm the complete pairing before specifying a diameter mix or media charge.
Can a custom size, lid or vacuum version be requested?
Specify the material formulation, jar envelope, lid and machine holder. Ask for the supplied grade if a comparison with standard nylon is important. A proposed custom feature is subject to engineering confirmation and is not automatically included with a standard jar.
What trial evidence is available for this jar material?
No matching measured trial is identified for Modified Nylon Milling Jar in the available summaries. Ask for a test with the specified modified nylon grade, actual jar and documented loading. A material-family observation does not certify the supplied part or grade.
Start with your sample.
Nominal capacity, jar volume and usable sample load are different. Confirm the model, jars and electrical requirements with our engineers.
Choosing Jars and Grinding MediaWILL IT WORK
FOR YOUR MATERIAL?
Plan a sample evaluation with our engineers.
Request free sample grinding