Sample assessment
The granular manganese-dioxide sample was tested first in another type of mill and then in a horizontal planetary stage. The planetary model was not named.
Analyst consideration: For manganese dioxide, recovered deposits directly matter to the accepted nonadhering stage. Because the numerical target is private, selection should preserve that observed behavior while recovering the actual size criterion.
Recorded objective
Meet a privately controlled criterion whose numerical value was not recorded.
Equipment and selection
The successful stage is explicitly planetary, but its exact family and model are not recorded. TENCAN Laboratory Planetary Grinder is supplied as a catalog platform reference only; it is not identification of the tested machine.
Test setup
| Planetary-stage jar | PTFE; capacity not recorded |
|---|---|
| Planetary-stage media | Not recorded |
| Planetary-stage charge | Not recorded |
| Planetary-stage sample load | Not recorded |
| Planetary-stage speed setting | Not recorded |
| Planetary-stage cycle | Not recorded |
Unlabelled jar, media and load numbers remain source notation, not assigned units. Controller settings are not certified rpm. The cycle notation has no independently stated timing unit or reversing definition.
Recorded procedure and results
The preceding mill showed ball and wall adhesion after fifteen minutes. The procedure changed to a PTFE jar on a horizontal planetary mill. After forty minutes there was no adhesion and the particle size was explicitly marked as meeting the requirement. The original equipment field and most setup columns describe the preceding mill, so their load and speed values are not assigned to the successful planetary stage.
Interpretation
The positive outcome is directly attributable to the forty-minute planetary stage. The exact family, speed, media and size statistic remain unknown. The associated laboratory platform is a catalog reference, not identification of the tested model.
Practical precautions
Confirm the actual horizontal planetary machine and its full charge before repeating. Preserve the no-adhesion check and obtain the private acceptance criterion.
TENCAN alternatives to evaluate
TENCAN Compact Horizontal Planetary Ball Mill. A specifically identified TENCAN horizontal configuration can be evaluated against the accepted manganese-dioxide stage once its actual jar and load are known. No exact WXQM identity is inferred from the notebook. An explicitly specified horizontal platform would make the gravity arrangement and jar compatibility reviewable; this is a way to reproduce and compare the accepted stage without inventing the original family. This is an untested comparison proposal, not a result of this trial.
Exact successful planetary family/model not recorded; the TENCAN Laboratory Planetary Grinder catalog page is a catalog platform reference only.
About this trial
TENCAN laboratory trial, 2017–2020. Observations above come from this experimental record; selection considerations and proposed comparisons are engineering interpretation. Results apply to this sample and recorded conditions.