Technical Data Sheet of Tencan Vertical Planetary Ball Mill Production Model
Drive Mode | Gear drive |
Operation Mode | Two or four mill jars can be used for each grinding |
Max Load Capacity For Materials | Less than 1/3 of each jar volume, total max capacity: less than 1/3 of total jars volume |
Feed Size of Materials | Soft and Crispy material≤10mm,Other hard materials≤3mm |
Output Granularity | Smallest granularity can be reached to 0.1µm |
Rotational Speed Ratio | 1/2 |
Max.Continuous Operating Time | 72 Hours |
Materials of Available Mill Jars | 304 Stainless steel, 316l stainless steel, Zirconia, Nylon, PU, Alumina ceramic (corundum), PTFE, Agate, Tungsten carbide,etc |
Technical Parameter Table(I) of Vertical Square Planetary Ball Mill (Production Type) | ||||
Type NO | Specification | Volume of Each Matched Pot | Quantity | Remarks |
XQM-20 | 20L | 2-5L | 4pcs | Matched with vacuum mill pots from 2L to 4L |
XQM-40 | 40L | 5-10L | 4pcs | Can be Matched with 5L Vacuum mill Pot |
XQM-60 | 60L | 10-15L | 4pcs | Can be Matched with 10L Vacuum mill Pot |
XQM-100 | 100L | 20-25L | 4pcs | Can be Matched with 20L Vacuum mill Pot |
Technical Parameter Table(II) of Vertical Square Planetary Ball Mill (Production Type) | |||||||
Model | Power (KW) |
Voltage | Revolution Speed (rpm) |
Rotation Speed (rpm) |
Total Timing (min) |
Alternating Run Time of Forward & Reversal Rotation (min) |
Noise≤db |
XQM-20 | 4 | 380V-50Hz | 25-215 | 50-430 | 1-9999 | 1-999 | 65db |
XQM-40 | 5.5 | 380V-50Hz | 20-195 | 40-390 | 1-9999 | 1-999 | 68db |
XQM-60 | 7.5 | 380V-50Hz | 27-174 | 40-260 | 1-9999 | 1-999 | 68db |
XQM-100 | 11 | 380V-50Hz | 27-160 | 40-240 | 1-9999 | 1-999 | 68db |
Technical Parameter Table(III) of Vertical Square Planetary Ball Mill (Production Type) | ||||
Model | Power (KW) |
Speed Control Mode | Net Weight (kg) | Dimension (mm) |
XQM-20 | 4 | Frequency Control | 440 | 1200*760*920 |
XQM-40 | 5.5 | Frequency Control | 675 | 1400*850*1030 |
XQM-60 | 7.5 | Frequency Control | 875 | 1600*950*1120 |
XQM-100 | 11 | Frequency Control |
Planetary Ball Mill has four ball grinding tanks installed on one turntable. When the turntable rotates, the tank axis makes planetary movements, the balls and samples inside the tanks are impacted strongly in high speed movement, and samples are eventually ground into powder. Various kinds of different materials can be ground by the mill with dry or wet method. Minimum granularity of ground powder can be as small as 0.1μm.
Four samples at the same time). this kind of ball mill can be used for grinding special materials under the vacuum condition if it is loaded with vacuum mill jars.
Vertical planetary ball mill production model is a large-sized planetary ball mill which is designed, developed, and manufactured on the basis of working principle of small planetary ball mill. The
production planetary ball mill is mainly suitable for mass grinding production.
Đánh giá
Chưa có đánh giá nào.