Overview

Cryogenic planetary ball mill is a combination of planetary mill and refrigeration equipment. Most materials will be heated during high-speed grinding due to friction or exothermic reaction, which may lead to changes in physical and chemical properties of materials and produce negative grinding effect. Low temperature planetary ball mill is mainly used in material grinding process which needs strict temperature control.

Technical Data Sheet of Tencan Planetary Ball Mill

Drive Mode	Gear drive
Operation Mode	Two or four mill jars can be used for each grinding
Max Capacity for Materials	Less than 1/3 of each jar volume Total max capacity: less than 1/3 of total jars volume
Feed Size	Soft and crispy materials ≤ 10mm Other hard materials ≤ 3mm
Output Granularity	Smallest granularity can be achieved to 0.1μm
Rotation Speed Ratio	1:2
Max Continuous Operating Time	72 Hours
Materials of Available Mill Jars	304 Stainless steel, 316l stainless steel, Zirconia, Nylon, PU, Alumina ceramic (corundum), PTFE, Agate, Tungsten carbide

Remarks: Cryogenic planetary ball mill is combination of planetary ball mill plus air-cooling device, which can be equipped with vertical planetary ball mill, horizontal planetary ball mill, full-directional planetary ball mill.

Table 1 Technical Parameters For Cryogenic Planetary Ball Mill

Model No.	Voltage	Power	Rotation Speed	Noise
XQM-1(C)	220V-50Hz	0.75KW	70-670 rpm	Less than 60db
XQM-2(C)	220V-50Hz	0.75KW	70-670 rpm	Less than 60db
XQM-4(C)	220V-50Hz	0.75KW	70-670 rpm	Less than 60db
XQM-6(C)	220V-50Hz	0.75KW	70-670 rpm	Less than 60db
XQM-8(C)	220V-50Hz	1.5KW	70-580 rpm	Less than 60db
XQM-10(C)	220V-50Hz	1.5KW	70-580 rpm	Less than 60db
XQM-12(C)	220V-50Hz	1.5KW	70-580 rpm	Less than 60db
XQM-20(C)	380V-50Hz	4.0KW	50-430 rpm	Less than 65db
XQM-40(C)	380V-50Hz	5.5KW	40-390 rpm	Less than 68db
XQM-60(C)	380V-50Hz	7.5KW	40-260 rpm	Less than 68db
XQM-100(C)	380V-50Hz	11KW	40-260 rpm	Less than 68db

Table 2 Technical Parameters For Cryogenic Planetary Ball Mill

Model No.	Speed Control	Net Weight	Net Dimensions
XQM-1(C)	Frequency Control	93kgs	750*470*564mm
XQM-2(C)	Frequency Control	93kgs	750*470*564mm
XQM-4(C)	Frequency Control	93kgs	750*470*564mm
XQM-6(C)	Frequency Control	93kgs	750*470*564mm
XQM-8(C)	Frequency Control	150kgs	900*600*640mm
XQM-10(C)	Frequency Control	150kgs	900*600*640mm
XQM-12(C)	Frequency Control	150kgs	900*600*640mm
XQM-20(C)	Frequency Control	330kgs	1200*750*920mm
XQM-40(C)	Frequency Control	468kgs	1400*850*1160mm
XQM-60(C)	Frequency Control	900kgs	1600*990*1250mm
XQM-100(C)	Frequency Control	1250kgs	1750*1140*1330mm

Cryogenic planetary ball mill has four ball grinding tanks installed on one turntable. When the turntable rotates, the tank axis makes planetary movements and the balls in the tanks grinds and mixes samples in high speed movement. The product can smash and blend various products of different materials and granularity with dry or wet methods. Minimum granularity of ground powder can be as small as 0.1mm.