Cryogenic Planetary Ball Mill

  • Applications:Cryogenic planetary ball mill is mainly applied to ultrafine grinding under condition of low-temperature requested by materials. Compared with the artificial injection of liquid nitrogen cooling, cold-air planetary ball mill is much easier and more convenient to be operated, it is also cost-saved, and low-energy consumed.

Overview

Cryogenic planetary ball mill is a combination of planetary mill and refrigeration equipment. Most materials will be heated during high-speed grinding due to friction or exothermic reaction, which may lead to changes in physical and chemical properties of materials and produce negative grinding effect. Low temperature planetary ball mill is mainly used in material grinding process which needs strict temperature control.

Technical Data Sheet of Tencan Planetary Ball Mill

Drive Mode Gear drive
Operation Mode Two or four mill jars can be used for each grinding
Max Capacity for Materials Less than 1/3 of each jar volume

Total max capacity: less than 1/3 of total jars volume

Feed Size Soft and crispy materials ≤ 10mm

Other hard materials ≤ 3mm

Output Granularity Smallest granularity can be achieved to 0.1μm
Rotation Speed Ratio 1:2
Max Continuous Operating Time 72 Hours
Materials of Available Mill Jars 304 Stainless steel, 316l stainless steel, Zirconia, Nylon, PU,
Alumina ceramic (corundum), PTFE, Agate, Tungsten carbide

Remarks: Cryogenic planetary ball mill is combination of planetary ball mill plus air-cooling device, which can be equipped with vertical planetary ball mill, horizontal planetary ball mill, full-directional planetary ball mill.

Table 1 Technical Parameters For Cryogenic Planetary Ball Mill

Model No. Voltage Power Rotation Speed Noise
XQM-1(C) 220V-50Hz 0.75KW 70-670 rpm Less than 60db
XQM-2(C) 220V-50Hz 0.75KW 70-670 rpm Less than 60db
XQM-4(C) 220V-50Hz 0.75KW 70-670 rpm Less than 60db
XQM-6(C) 220V-50Hz 0.75KW 70-670 rpm Less than 60db
XQM-8(C) 220V-50Hz 1.5KW 70-580 rpm Less than 60db
XQM-10(C) 220V-50Hz 1.5KW 70-580 rpm Less than 60db
XQM-12(C) 220V-50Hz 1.5KW 70-580 rpm Less than 60db
XQM-20(C) 380V-50Hz 4.0KW 50-430 rpm Less than 65db
XQM-40(C) 380V-50Hz 5.5KW 40-390 rpm Less than 68db
XQM-60(C) 380V-50Hz 7.5KW 40-260 rpm Less than 68db
XQM-100(C) 380V-50Hz 11KW 40-260 rpm Less than 68db

Table 2 Technical Parameters For Cryogenic Planetary Ball Mill

Model No. Speed Control Net Weight Net Dimensions
XQM-1(C) Frequency Control 93kgs 750*470*564mm
XQM-2(C) Frequency Control 93kgs 750*470*564mm
XQM-4(C) Frequency Control 93kgs 750*470*564mm
XQM-6(C) Frequency Control 93kgs 750*470*564mm
XQM-8(C) Frequency Control 150kgs 900*600*640mm
XQM-10(C) Frequency Control 150kgs 900*600*640mm
XQM-12(C) Frequency Control 150kgs 900*600*640mm
XQM-20(C) Frequency Control 330kgs 1200*750*920mm
XQM-40(C) Frequency Control 468kgs 1400*850*1160mm
XQM-60(C) Frequency Control 900kgs 1600*990*1250mm
XQM-100(C) Frequency Control 1250kgs 1750*1140*1330mm

Cryogenic planetary ball mill has four ball grinding tanks installed on one turntable. When the turntable rotates, the tank axis makes planetary movements and the balls in the tanks grinds and mixes samples in high speed movement. The product can smash and blend various products of different materials and granularity with dry or wet methods. Minimum granularity of ground powder can be as small as 0.1mm.

 

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Cryogenic Planetary Ball Mill”

CONTACT US

viVI
× How can I help you?