Vertical planetary ball mill is a necessary device of high-tech materials mixing, fine grinding, sample making, new product development and small batch production. Tencan planetary ball mill owns small volume, high efficiency, low noise and functional features which is a ideal equipment for R&D institution, university, enterprises laboratory to get samples ( you can get four samples from each batch at the same time). You can also grind powder samples under the vacuum state when equipped with vacuum ball mill jars.

Technical Data Sheet of Tencan Vertical Planetary Ball Mill Semi-circle Round Model

Drive Mode	Gear drive or belt drive
Operation Mode	Two or four mill jars can be used for each grinding
Max Load Capacity	Less than 1/3 of each jar volume Total max capacity: less than 1/3 of total jars volume
Feed Size of Materials	Soft and crispy materials ≤ 10mm Other hard materials ≤ 3mm
Output Granule	Smallest granularity can be achieved to 0.1μm
Rotational Speed Ratio	1/2
Max.Continuous Operating Time	72 Hours
Materials of Available Mill Jars	304 Stainless steel, 316l stainless steel, Zirconia, Nylon, Polyurethane, Alumina ceramic (corundum), PTFE, Agate, Tungsten carbide

Technical Parameter Table(I) of Vertical Laboratory Planetary Ball Mill(Semi-circle Round Type)
Type NO	Specification	Volume of Each Matched Pot	Quantity	Remarks
XQM-2A	2L	50-500ml	4pcs	Matched with vacuum mill pots from 50ml to 250ml
XQM-4A	4L	250-1000ml	4pcs	Matched with vacuum mill pots from 50ml to 1000ml
XQM-8A	8L	1-2L	4pcs	Matched with vacuum mill pots from 50ml to 1500ml
XQM-10A	10L	1-2.5L	4pcs	Matched with vacuum mill pots from 1L to 2L
XQM-12A	12L	1-3L	4pcs	Matched with vacuum mill pots from 1L to 2L
XQM-16A	16L	2-4L	4pcs	Matched with vacuum mill pots from 1L to 3L

Technical Parameter Table(II) of Vertical Laboratory Planetary Ball Mill (Semi-circle Round Type)
Model	Power (KW)	Voltage	Revolution Speed (rpm)	Rotation Speed (rpm)	Total Timing (min)	Alternating Run Time of Forward & Reversal Rotation (min)	Noise≤db
XQM-2A	0.75	220V-50Hz	35-335	70-670	1-9999	1-999	60±5
XQM-4A	0.75	220V-50Hz	35-335	70-670	1-9999	1-999	60±5
XQM-8A	1.5	220V-50Hz	35-290	70-580	1-9999	1-999	60±5
XQM-10A	1.5	220V-50Hz	35-290	70-580	1-9999	1-999	60±5
XQM-12A	1.5	220V-50Hz	35-290	70-580	1-9999	1-999	60±5
XQM-16A	3	380V-50Hz	30-255	60-510	1-9999	1-999	60±5

Technical Parameter Table (III) of Vertical Laboratory Planetary Ball Mill (Semi-circle Round Type)
Model	Power (KW)	Speed Control Mode	Net Weight (kg)	Dimension (mm)
XQM-2A	0.75	Frequency Control	80	750*470*590
XQM-4A	0.75	Frequency Control	80	750*470*590
XQM-8A	1.5	Frequency Control	132	880*560*670
XQM-10A	1.5	Frequency Control	132	880*560*670
XQM-12A	1.5	Frequency Control	132	880*560*670
XQM-16A	3	Frequency Control	203	950*600*710

Planetary Ball Mill often has four ball grinding tanks installed on one turntable. When the turntable rotates, the tank axis makes planetary movements, the balls and samples inside the tanks are impacted strongly in high speed movement, and samples are eventually ground into powder. Various kinds of different materials can be ground by the mill with dry or wet method. Minimum granularity of ground powder can be as small as 0.1μm.